Low Rise Lift |
| |
|
 |
| Dimensions |
- 2500 mm x 900 mm |
| Minimum height |
- 115 mm |
| Maximum height |
- 600 mm |
| Capacity |
- 2500 Kg s. |
| Power required |
- The unit operates on 2 HP power supply or compressed air depending upon the availability at customers workshop. The unit also operates manually on hand pump. |
| Applications |
- The unit is ideally suitable for automobile workshops carrying operations such as wheel balancing, wheel balancing, wheel alignment, tyre rotation, wheel greasing, suspension overhauls, brake overhaul and oil change. |
|
|
|
|
| |
|
| |
4 Post Lift |
| |
|
 |
Surabhi make 4 post lifts are ideally suitable for modern automobile garages where jobs such as wheel alignment, under chassis repairs and suspension overhauls are carried out.The overall dimensions and the technical specifications of the lifts are as follows : |
| |
| Technical Specifications |
• Overall Length |
5950 mm |
• Overall width |
3000 mm |
• Maximum height |
1800 mm |
• Minimum height |
150 mm |
• Power required |
3.7 Kw. |
• Maximum capacity Kgs. |
2500 |
• Time to lift 1800 mm Seconds |
45 Seconds |
|
| |
|
|
APPLICATIONS |
• Wheel Alignment
• Under Chassis Repairs
• Suspension Overhaul |
|
| |
| Salient Features |
• Easy to handle
• Easy and quicker to install
• Eliminate pit in workshop
• Easy to shift
• Keeps workshop clean and tidy |
|
|
|
| |
|
| |
Engine Removal Crane |
| |
|
 |
| Dimensions |
- 2000 mm x 800 mm |
| Minimum height |
- 115mm |
| Maximum height |
- 2500 mm |
| Capacity |
- 400 Kg. s. |
| Operation |
- The lift operates manually. The lift is easy to operate and 100% safe due to its worm and worm wheel's positive locking principle. The lift
can move with the engine lifted position. |
| Applications |
- The lift is ideally suitable for all types of automobile garages. |
|
|
|
|
| |
|
| |
Platform Lift |
| |
|
 |
Operates on 6 kg. air pressure hence can continue to use in case if power failure with air in the compressor
Consumes very less space 4000 mm x 2000 mm & height upto 1700 mm.
No pillers, Hence excess from all sides without any hinderance.
Ideally suitable to carry out all types of jobs of 2 - post lift plus wheel alignment also. |
|
|
|
|
| |
|
| |
2 Wheeler Work Bench |
| |
|
 |
| Dimensions |
- 1800 x 675 |
| Minimum height |
- 150 mm |
| Maximum height |
- 750 mm |
| Capacity |
- 200 Kg. s. |
| Operation |
- This unit Operates on Hand pump. The unit also operates on compressed air or 1 HP power supply. The unit has arm locking safety device at various heights. |
| Applications |
- The workbench is useful all types 2 wheeler garages. |
|
|
|
|
| |
|
| |
4 Wheeler Unloading Ramp |
| |
|
 |
• Surabhi make unloading ramps are 100% safe and user friendly. These units need very small space and are economically highly viable. The units are a necessecity for automobile dealer for unloading and loading of new vehicle. The specifications are as follows : |
| |
| Technical Specifications |
| • Overall Length : |
6000 mm |
| • Overall Width : |
3250 mm |
| • Maximum height : |
30000 mm |
| • Minimum height : |
ground level |
| • Power required : |
3.7 Kw. |
| • Maximum capacity : |
2000 Kgs. |
| Space saving is almost 1/3rd of normal unit |
|
| |
|
| Salient Features |
• 100% Safe to handle
• Overload relay protection
• Limit switch at the top and bottom
position R/F control
• Displacement for 2700mm
• Adjustable to any Height of the trailer
• Capacity for 2000 Kg.
• Free from maintenance
• User friendly |
|
|
|
| |
|
| |
2-3 Wheeler Unloading Ramp |
| |
|
 |
Surabhi make 2-3 wheeler unloading ramp is designed with a view to reduce the risks of the mechanic while unloading the vehicles from the trucks. This is a purely mechanical one and do not need any power. Also it being very light is very easy to move and adjust with the trucks. It is offered in two parts the one for the vehicle at lower deck and the other when connected to the lower unit can be used to unload the vehicle from the higher deck. |
|
|
|
|
| |
|
| |
2-3 Wheeler Unloading Ramp |
| |
|
 |
Surabhi has developed a "Tool Trolley" which is very economical and versatile for any type of automobile garage. It has 3 sliding compartments for various spanners, one top cover for keeping nut bolts and other small components and a large open compartment for storing the heavy parts. It has locking system where in all the compartments can be locked for security. The trolley is fitted with castors for smooth movement on the shop floor. |
|
|
|
|
| |
|
